Put driver side lock mechanism back together after greasing w/ Lithium grease. All levers/linkages work.

However after I put it back into the door and reconnected all linkages, locking/unlocking w/ driver side door pin does not work! The pin will not go all the way down!

Tried locking w/ key on driver side - all 4 doorpins go down & lock. However the driver side doorpin of does not go down all the way - all 3 remaining pins go down all the way! I can open the driver side door in this situation - the remaining 3 are indeed locked.

Unlocking w/ key on driver side - same behavior as above but are unlocked.

I can manually move the linkage that goes into the door actuator and it correctly moves all 4 pins up and down.

Pls. advise!

Thanks

--Sanjeev

• Johan750: Door lock mechanism removal - help! - sanjeev 2008-05-13 16:15:30 (80 views)
  • Re: Johan750: Door lock mechanism removal - help! - ogga4 2008-06-08 23:36:07 (22 views)
  • Rivet heads ground out & cover off - sanjeev 2008-05-13 19:02:00 (45 views)
    • Actually that's Sean's doorlock. (nt) - Johan750 2008-05-14 11:04:49 (44 views)
  • Re: Johan750: Door lock mechanism removal - help! - rv8flyboy 2008-05-13 17:03:55 (39 views)
    • yes, but I figured it out - sanjeev 2008-05-13 17:40:39 (39 views)
      • Yup. that's the way! (nt) - Johan750 2008-05-14 11:04:20 (38 views)
        • Thanks Johan, more... - sanjeev 2008-05-14 18:38:34 (35 views)
          • I think that's the same grease as in the cv joint of the driveshaft - Johan750 2008-05-15 11:16:18 (37 views)
            • ut Johan, greased and installed but am going out of my mind! - help! - sanjeev 2008-05-17 20:51:35 (49 views)
              • Re: ut Johan, greased and installed but am going out of my mind! - help! - rv8flyboy 2008-05-18 11:18:02 (42 views)
                • Thanks - tried your suggestion, more... - sanjeev 2008-05-18 13:49:52 (35 views)
                  • Re: Thanks - tried your suggestion, more... - rv8flyboy 2008-05-18 22:33:11 (35 views)
                    • Double lock mode? - sanjeev 2008-05-19 07:20:24 (38 views)