Subject: The CD changer's coax output is no longer used with the BM53 Author: Brian (moderator) : member since January, 2005 : 6756 posts Posted on: 2007-10-12 08:32:48

The DSP system no longer uses the coax signal from the CD changer when you upgrade to the BM53. It uses the 6-pin analog audio plug on the CD changer instead. So, you will need to add the CD audio input cable PN 61.12-0.140.718. The -718 cable will tie into the white plug on the -785 cable.

The 3-pin I-Bus plug is totally independent of all the other adapters. You did not change anything that should have affected the CDC I-Bus plug. That one is a mystery. When you have the CD changer connected (to this plug), does the radio at least recognize the CD changer and attempt to play CDs? If so, the plug is good. If the plug is good, then you might have a problem with the Resler interface or NavCoder on your computer.

• Got a BM53 radio finally - trevize 2007-10-05 13:20:03 (290 views)
  • That is the correct cable list. They are all in the trunk and easy. (url) - Brian 2007-10-05 13:31:47 (206 views)
    • Re: That is the correct cable list. They are all in the trunk and easy. - ernatz 2007-10-18 23:04:36 (101 views)
      • Re: That is the correct cable list. They are all in the trunk and easy. (url) - Brian 2007-10-19 06:15:17 (131 views)
    • Re: That is the correct cable list. They are all in the trunk and easy. - trevize 2007-10-11 23:00:49 (103 views)
      • Double-check the 10-pin to 12-pin adapter PN 61.12-6.924.785 - Brian 2007-10-11 23:09:14 (127 views)
        • Re: Double-check the 10-pin to 12-pin adapter PN 61.12-6.924.785 - trevize 2007-10-12 08:01:55 (112 views)
          • The CD changer's coax output is no longer used with the BM53 - Brian 2007-10-12 08:32:48 (155 views)
            • Re: The CD changer's coax output is no longer used with the BM53 - trevize 2007-10-13 12:37:56 (133 views)
            • Re: The CD changer's coax output is no longer used with the BM53 - trevize 2007-10-12 08:47:35 (115 views)