Subject: Camera input for the full-blown VM Author: jcarey (moderator) : member since January, 2004 : 2399 posts Posted on: 2007-09-02 20:00:20

I did find the VM pinouts that inlclude the nightime camera input shown on Connector X18804 the 18 pin natural colored connector on the VM

Pin 1 - Composite Analog video input (+)
Pin 10 - Composite Analog video shiled (-)

These connections are made to a Nightime camera module whihc may also be onthe Most or Can bus to select this input via the bus because there is no simple grouning scheme like there was in the E38/39/53/46 VM.

I hope this helps,

John

Bettie-II is my Titanium Gray 745i currently with 21k miles

• what is the easiest, cheapest way to install back up camera... - mfaraldi 2007-05-30 08:56:10 (1247 views)
  • Re: what is the easiest, cheapest way to install back up camera... - vegasautophile 2007-06-05 18:12:32 (632 views)
    • Re: what is the easiest, cheapest way to install back up camera... - onefat99 2007-06-06 00:01:25 (540 views)
      • Re: what is the easiest, cheapest way to install back up camera... - dtbimmer 2007-06-07 04:17:05 (522 views)
        • OEM backup camera installation does not require any coding (nt) - Brian 2007-08-26 08:34:24 (416 views)
          • Brian, just saw your post below and yours..... - dtbimmer 2007-08-26 22:29:32 (267 views)
          • Re: OEM backup camera installation does not require any coding - dtbimmer 2007-08-26 22:26:16 (307 views)
            • On another subject, do you have the wiring pinouts for the full-blown VM? - Brian 2007-08-27 06:33:49 (230 views)
              • Camera input for the full-blown VM - jcarey 2007-09-02 20:00:20 (218 views)
                • Those are the inputs for the forward looking Night Vision camera - Brian 2007-09-03 21:14:49 (218 views)
                  • WDS Version 10 does not show anything like this. (nt) - jcarey 2007-09-04 08:57:06 (151 views)
              • Brian, my WDS I found this description for the Video 5 Drive (url) - jcarey 2007-09-01 12:02:14 (206 views)
                • I think I need to identify the ''connection option for a video camera signal'' - Brian 2007-09-01 18:32:53 (183 views)
            • The kit's install instructions are clear that it does not need coding... - Brian 2007-08-27 05:09:46 (218 views)
              • Re: The kit's install instructions are clear that it does not need coding... - dtbimmer 2007-08-27 23:04:59 (213 views)
                • HERE is the guy to get the back up camera kit - as promised::: - mfaraldi 2007-08-28 18:57:59 (275 views)
                  • Better yet, Go to EBAY and search item # 7967165243 (url) - mfaraldi 2007-08-28 19:00:50 (286 views)