Subject: You are probably all set... Author: Brian (moderator) : member since January, 2005 : 6705 posts Posted on: 2007-08-09 12:45:25

Great deal.

You need three separate adapter parts to convert your round pin harness to the flat pin radio plugs. In addition, you will need a 6-pin analog audio cable for the CD changer, since you have DSP. Depending on what is already connected to the radio, you may have one (the main -957 adapter) or all three. I would check first. It is not too likely that you are getting the -716 analog audio cable for the CD changer. Plus, you might as well get the Aux input cable too, and do it all at once. These are the parts you will need.

Adapter cables:
61.12-6 913 957 Round Pin to Flat Pin Main Radio Harness Adapter
61.12-6 913 955 New Gen Radio Antenna Adapter
61.12-6 924 785 10-Pin to 12-Pin Radio Audio Input Adapter

CD changer analog audio cable:
61.12-0 140 716 CD Changer Audio Input Cable

Aux input cable:
82.11-0 149 390 Aux Input Adapter Kit for New Gen Radio

• MK4 and BM53 Upgrade - compfixer 2007-08-09 12:07:30 (180 views)
  • You are probably all set... - Brian 2007-08-09 12:45:25 (151 views)
    • Re: Question - hpy540 2007-09-04 10:51:28 (51 views)
    • Re: You are probably all set... - compfixer 2007-08-09 13:54:37 (89 views)