Subject: Re: Z3 camber Author: albrazzi : member since November, 2006 : 1 post Posted on: 2006-11-23 12:02:58

If you want to do it cheap and have the same results as expensive camber plates go to BIMMERWORLD.COM they have a $20 shim kit that goes detween the strut and spindle. Just take these parts to your alignment shop and have them install and align.Never change anything on front end without alignment because camber change affects toe. I am using these on my 97 Z3 works great.Try to set about 2 degrees - negative camber. stock is less than 1 degree.Just remember you are changing factory specs and when they talk about tire wear and things like that you are on your own. BIG AL

• Z3 camber - sthoma9 2004-05-27 08:36:14 (1960 views)
  • Re: Z3 camber - albrazzi 2006-11-23 12:02:58 (983 views)
  • Re: Z3 camber - mpire 2005-07-27 15:44:31 (1438 views)