The 6 Series E24 Forum

Water Leak Passenger Side Kick Panel - joeb635 2006-05-03 08:42:23 (553 views)
- Std leaks in these cars are the - kff 2006-05-03 11:45:56 (510 views)
  - Re: Std leaks in these cars are the - joeb635 2006-05-11 09:41:22 (424 views)
    - Also check the ECU harness rubber gromet coming into the car as well. (nt) - bmw635 2006-05-12 11:48:54 (418 views)
      - Re: Also check the ECU harness rubber gromet coming into the car as well. - eurom90 2006-10-12 10:21:47 (182 views)

635csi misfire - marik 2006-05-12 23:26:57 (457 views)
- Replace the Motronic water temp sensor... (pic) - Vern 2006-09-12 16:13:31 (266 views)

spark plug wire issue - markus66 2006-05-14 20:49:14 (442 views)
- Try replacing the water temp sensor for the ECU... (pic) - Vern 2006-09-12 16:04:52 (250 views)
  - Crud...pic (pic) - Vern 2006-09-12 16:09:10 (254 views)
- Absolutely, I had same problem on my E12 (nt) - CUPDGRA 2006-05-15 17:30:55 (379 views)

basic engine heat - jmarkus66 2006-08-13 20:30:53 (266 views)
- See below and make sure your low speed and hi speed - Vern 2006-08-29 14:30:15 (246 views)
  - Vern, where are you at? There are 75 C t-stat available. Also add Water Wetter - bmw635 2006-08-30 01:00:44 (306 views)
    - Thanks for the heads up...I'm in So Cal - Vern 2006-08-30 02:00:34 (222 views)
      - Where did you get 71 C, never seen it anywhere. (nt) - bmw635 2006-08-30 02:03:04 (249 views)
        
        I believe it is 11 53 1 466 174, but I have to check the invoice (nt) - Vern 2006-08-30 14:20:26 (252 views)
        
        Tks, I'll check w/ Crevier.. (nt) - bmw635 2006-08-31 01:54:25 (234 views)
        
        The invoice had the stock t/stat part # - Vern 2006-09-01 02:22:05 (289 views)
        
        Tks. I'll keep an eye out! Got mix parts in my custom engine. - bmw635 2006-09-01 05:59:51 (234 views)
- If gauge is normal then it's normal as this engine doesn't trap alot of heat - bmw635 2006-08-14 03:35:37 (287 views)
- Normal on the temp gauge is about 190°F and the - kff 2006-08-13 23:11:58 (322 views)

speedometer blues - intenseburger 2006-08-08 10:40:13 (401 views)
- First, what year is your car? (nt) - CUPDGRA 2006-08-09 11:13:14 (354 views)
  - its an '84 (nt) - intenseburger 2006-08-10 12:46:10 (274 views)
    - No speedo cable, likely the SI batteries are caput (nt) - CUPDGRA 2006-08-10 13:59:25 (392 views)
      - thanks (nt) - intenseburger 2006-08-11 12:30:22 (301 views)
        
        When the S.I. Nicads leak, they will eat into the - Vern 2006-08-29 15:02:04 (309 views)
        
        If you want to retain the functionality of the SI, RadioShack has battery housin - bmw635 2006-08-30 01:57:57 (282 views)

can valve adjust effect temp - jmarkus66 2006-08-08 12:25:13 (332 views)
- If the valves were adjusted too tight beforehand... - Vern 2006-08-29 14:20:10 (261 views)
- Valve effect performance and noise, not temp. (nt) - bmw635 2006-08-13 17:53:35 (263 views)

How to remove oil pan from 86 635csi? - wickedmind2000 2006-08-02 15:16:49 (313 views)
- Yes, but you will have to lift the engine a bit, but it can stay - kff 2006-08-02 18:53:42 (315 views)
  - As with any M30, or 6 cylinder bimmer... - Vern 2006-08-29 14:00:14 (247 views)

m635CSi 'valve spring upgrade kit' what's it worth? - ans1956 2006-08-14 23:32:13 (306 views)
- Looks like dealer price is $550-ish; anyone interested for $199? (nt) - ans1956 2006-08-26 10:39:58 (281 views)
  - Re: Looks like dealer price is $550-ish; anyone interested for $199? - Steve Haygood 2006-08-28 02:22:00 (226 views)
    - The kit has sold; thanks for any interest. (nt) - ans1956 2006-08-29 11:24:09 (238 views)

New Brakes? Stock or Performance Rotors? - pmtre 2006-08-26 19:58:36 (290 views)
- email sent - Steve Haygood 2006-08-28 02:33:22 (265 views)
  - Steve, glad to see you here! Steve's right: E32 750 front & E34 540 rear - bmw635 aka Peter/ E24 on RF 2006-08-28 23:57:54 (301 views)
- Just use stock rotors and you can - kff 2006-08-27 05:34:26 (281 views)

Rear window broke - pmtre 2006-08-07 08:43:43 (297 views)
- Re: Rear window broke - pmtre 2006-08-08 12:27:09 (384 views)
- Change the switches with ones you know work to - kff 2006-08-07 09:27:57 (303 views)
  - Re: Change the switches with ones you know work to - ridgelyrocket 2006-08-26 10:42:34 (257 views)

Fix It, Sell It or Scrap It? - elkspringsaz 2006-07-31 17:08:33 (444 views)
- Looks Like I'm Fixing It... - elkspringsaz 2006-08-12 11:55:29 (331 views)
  - If you give me the yr and model you have I may have lots of info for you. - bmw635 2006-08-13 17:49:35 (331 views)
    - Re: If you give me the yr and model you have I may have lots of info for you. - elkspringsaz 2006-08-24 10:18:56 (260 views)
      - I have Eibach & Bilstein Sport and very happy. The later M30 Euro block is same - bmw635 2006-08-25 01:44:40 (340 views)
        
        BTW, head gasket is from 93 Euro M5 3.8L (94.5mm bore). (nt) - bmw635 2006-08-25 01:56:51 (275 views)
- Suddenly a More Pressing Problem - elkspringsaz 2006-08-03 22:25:11 (368 views)
  - Pressing Problem Resolved - elkspringsaz 2006-08-09 22:45:35 (337 views)
    - Re: Pressing Problem Resolved - resabed01 2006-08-20 16:59:14 (282 views)
      - Cleaning the Tank for Welding - elkspringsaz 2006-08-24 08:02:56 (296 views)
    - Glad you reported the fix. Thanks. I had heard of this - kff 2006-08-10 11:57:20 (290 views)
      - Re: Glad you reported the fix. - elkspringsaz 2006-08-10 22:49:01 (279 views)
    - Glad to hear it's fixed. And thanks for letting us know the cause... - cfisher 2006-08-10 11:09:03 (272 views)
  - Re: Suddenly a More Pressing Problem (url) - cfisher 2006-08-04 11:45:45 (361 views)
    - ACK! when I posted half of my post got deleted. :-( - cfisher 2006-08-04 11:54:48 (299 views)
      - Re: ACK! when I posted half of my post got deleted. :-( - elkspringsaz 2006-08-05 01:02:49 (312 views)
        
        Re: ACK! when I posted half of my post got deleted. :-( (url) - cfisher 2006-08-07 16:03:58 (317 views)
        The Dealer has the CD as does the two higher priced, - kff 2006-08-07 09:36:44 (320 views)
- Fix it definitely! - cfisher 2006-08-03 11:32:12 (611 views)
- Well you are not going to get us to tell you to do anything but fix it up (url) - kff 2006-07-31 23:00:48 (312 views)
  - Re: Well you are not going to get us to tell you to do anything but fix it up - elkspringsaz 2006-08-02 22:47:10 (350 views)
    - You keep posting easy to answer questions like these (url) - kff 2006-08-03 08:07:24 (353 views)

elkspringsaz-Let's discuss that car some. (url) - kff 2006-08-12 16:22:44 (305 views)
- Let's discuss the Brakes some. - elkspringsaz 2006-08-23 23:13:28 (254 views)
  - Brake upgrades are: E32 750 cliper & rotor for front., E34 540 rear caliper & - bmw635 2006-08-24 06:49:44 (321 views)
    - Whose Pistons did you use for the 3.7? - elkspringsaz 2006-08-24 10:34:30 (363 views)
      - Sold the 93.5mm?10:1 Euro pistons on Ebay last month for $30. Ross's custom made - bmw635 2006-08-25 01:34:51 (261 views)

SHARKFEST WEST is now a NO FEE event (url) - eurowannabe 2006-07-29 02:09:14 (1859 views)
- The SharkFest Link (url) - kff 2006-08-01 09:40:29 (289 views)
  - There's a SharkFest East just passed at BMW plant in NC. (url) - bmw635 2006-08-23 05:30:46 (295 views)

does anyone know how to replace a headlight? - intenseburger 2006-08-06 02:19:05 (315 views)
- Re: does anyone know how to replace a headlight? - kff 2006-08-07 09:40:44 (330 views)
  - Re: does anyone know how to replace a headlight? - intenseburger 2006-08-07 16:41:56 (296 views)

temp vacuum hose - jmarkus66 2006-07-31 17:25:18 (354 views)
- Re: temp vacuum hose - jmarkus66 2006-07-31 22:08:52 (352 views)
  - The rare special hose is a flow restrictor for the vacuum - kff 2006-07-31 23:02:59 (308 views)
    - Re: The rare special hose is a flow restrictor for the vacuum - jmarkus66 2006-07-31 23:25:53 (257 views)
      - Sure you can, but then the HVAC will not hold temp properly. - kff 2006-08-01 09:37:04 (248 views)

speed sensor testing - jmarkus66 2006-07-27 21:28:01 (329 views)
- nope. the sensors Must be connected correctly - kff 2006-07-27 21:58:35 (299 views)
  - Re: nope. the sensors Must be connected correctly - jmarkus66 2006-07-28 00:08:27 (253 views)
    - One is a speed sensor and the other is a position sensor - kff 2006-07-28 10:21:42 (268 views)
      - Re: One is a speed sensor and the other is a position sensor - jmarkus66 2006-07-28 14:48:43 (269 views)
        
        The two devices are the same part. Interchangeable, but - kff 2006-07-28 19:46:17 (275 views)
        
        Re: The two devices are the same part. Interchangeable, but - jmarkus66 2006-07-29 01:56:54 (267 views)
        
        Since the computer needs BOTH sensor inputs to start - kff 2006-07-29 09:44:06 (304 views)

Removing the door panels from a 6er - shogun 2006-07-14 00:01:53 (1502 views)
- DavidC, E24.org material? (nt) - bmw635 2006-07-14 03:46:01 (288 views)
  - Indeed. (nt) - davidc 2006-07-21 17:23:45 (297 views)

maintenance info (url) - shogun 2006-07-20 22:16:48 (302 views)

633 CSi Oil Consumption - rotkohl 2006-06-24 20:23:59 (336 views)
- Smoke on start & 200k mile could use a head job. (nt) - bmw635 2006-07-14 03:59:13 (304 views)
- 633 CSi Oil Consumption - shogun 2006-06-26 00:18:51 (423 views)
  - Re: 633 CSi Oil Consumption - rotkohl 2006-06-26 21:05:41 (292 views)

SHARKFEST WEST 06, Vegas, for E24 & E9 coupes (url) - eurowannabe 2006-07-07 13:28:44 (336 views)

Coverlay Dash Caps - kmckenzie 2006-07-13 19:12:25 (340 views)
- 88-89 is same. 88 last production cars were sold into 89. Had an 89! (nt) - bmw635 2006-07-14 03:47:35 (330 views)

Minneapolis Bimmer Group Gathering! July 11, 2006 (pic) - Triton540i 2006-07-10 20:01:20 (252 views)

chip - bimtk 2006-06-29 19:41:04 (290 views)
- Re: chip - kjkumar 2006-07-03 02:04:00 (470 views)
  - Re: chip - kjkumar 2006-07-08 01:39:19 (287 views)
  - He mentioned a 633 so his DME will be different and - kff 2006-07-03 10:43:48 (280 views)
- Check the E23 board. (url) - kff 2006-06-29 22:46:28 (430 views)
  - Re: Check the E23 board. - bimtk 2006-06-30 20:05:10 (262 views)

performance exhaust - bimtk 2006-06-27 19:57:43 (354 views)
- Go custom, probaby less expensive than the aftermarket - kff 2006-06-28 10:38:36 (322 views)
  - Re: Go custom, probaby less expensive than the aftermarket - rotkohl 2006-07-01 18:34:29 (371 views)

Any thoughts on this? - sandman512 2006-05-26 19:46:13 (381 views)
- Any thoughts on this? - shogun 2006-06-26 00:25:18 (286 views)

tranny failure/ext warranty (as per bmw dealer)/repair refusal - 7harte7 2006-06-19 20:32:04 (380 views)
- you have an E38, this is E24 board (url) - shogun 2006-06-26 00:05:37 (260 views)

tranny failure/ext warranty (as per bmw dealer)/repair refusal - 7harte7 2006-06-19 20:38:45 (302 views)

Swine enter key - let me try again.... - magofo 2006-05-31 07:07:57 (354 views)
- I am next to Costa Mesa & know 635 well, do yo need to check out the car? Email - bmw635 2006-06-02 15:07:29 (367 views)

Zender Body Kit Question - autobahnfahrer 2006-05-25 12:43:19 (697 views)
- I do have a Zender kit that will fit US E24. Selling the front - bmw635 2006-05-30 14:05:20 (462 views)
- Here is the Zender kit (url) - spencer7 2006-05-26 16:38:45 (647 views)
- Zender kits were made for the Euro cars, sorry, but - kff 2006-05-25 23:07:47 (449 views)

Question about bumpers, spoilers, etc. to e24 experts. - cfisher 2006-05-01 20:24:26 (452 views)
- Why not buy the 88-89 model as they're taotally different inside/ out. Better - bmw635 2006-05-19 01:24:30 (421 views)
  - Re: Why not buy the 88-89 model as they're taotally different inside/ out. Better - cfisher 2006-05-23 11:02:07 (325 views)
- Complete bumper, spoiler and sidecover will have to be transplanted- bolt-on. (nt) - bmw635 2006-05-16 10:45:49 (401 views)
  - Thank you!!!! I appreciate the help. (nt) - cfisher 2006-05-17 17:39:05 (269 views)

635csi Warm Start Problems - marik 2006-05-09 18:26:10 (423 views)
- Re: 635csi Warm Start Problems - cw6er 2006-05-15 00:23:06 (380 views)
- Could be bad AFM. Search on testing AFM for E28 as it same as E24 and there's - bmw635 2006-05-12 11:56:44 (355 views)
  - Re: Could be bad AFM. Search on testing AFM for E28 as it same as E24 and there's - marik 2006-05-12 23:07:49 (371 views)
    - Was it because of moisture in cap? (nt) - bmw635 2006-05-16 10:41:48 (311 views)
      - You bet, sir. Both seemed original 21 years old. The - marik 2006-05-16 17:24:32 (313 views)
        
        I had that problem from washing engine but not from really old parts.:-)))))) (nt) - bmw635 2006-05-19 01:23:40 (353 views)

Leather dash on Ebay...no reserve (url) - m6sandiego 2006-05-15 20:19:29 (495 views)

2 fuel pump questions - markus66 2006-05-10 23:49:22 (453 views)
- Re: - thegreendragonfly 2006-05-11 14:11:19 (325 views)
  - Re: Re: - markus66 2006-05-11 18:36:18 (322 views)
    - Re: fuel pump - cw6er 2006-05-15 00:11:48 (349 views)
    - The symtons could be AFM, fuel filter, injector. Fuel relay & pump will make car - bmw635 2006-05-12 11:47:15 (409 views)

ac touble shooting - markus66 2006-05-14 13:20:06 (349 views)
- Re: ac touble shooting - resabed01 2006-05-14 15:40:34 (319 views)

Souped up engine out of 635csi into 735i E32? - sinij 2006-04-29 12:26:16 (448 views)
- We sold E32 735 for E24 motor mounts (nt) - euro635gas 2006-05-02 00:06:26 (346 views)
  - Re: We sold E32 735 for E24 motor mounts (pic) - euro635gas 2006-05-02 00:09:59 (420 views)
    - never done custom mounts, how hard ? - sinij 2006-05-07 11:28:30 (306 views)
- Re: Souped up engine out of 635csi into 735i E32? - kff 2006-05-01 10:24:23 (352 views)
  - thanks! - sinij 2006-05-01 19:53:06 (278 views)
- anyone has any ideas on what exact differences in wiring or oil pan? (nt) - sinij 2006-04-29 21:24:45 (301 views)
  - E24 and E32 oil pan is different but can be swapped. The rest should be OK - bmw635 2006-05-12 12:03:06 (300 views)

SRS Light Came on after I repaired the instrument cluster. - samer0214 2006-05-09 22:28:16 (378 views)
- Check on BigCoupeGroup for info as I've not dealt with this on my previous 89 - bmw635 2006-05-12 11:55:10 (347 views)

Access to Brake Light Bulbs - joeb635 2006-05-09 12:41:52 (590 views)
- Easy (pic) - euro635gas 2006-05-10 14:12:05 (558 views)
  - Re: Easy - joeb635 2006-05-11 09:33:10 (343 views)

Flasher Relay Location - joeb635 2006-04-24 22:55:41 (522 views)
- Re: Flasher Relay Location - joeb635 2006-05-03 08:39:38 (483 views)
  - Glad you got it fixed. (nt) - kff 2006-05-03 11:46:31 (349 views)
- Re: Flasher Relay Location - kff 2006-04-26 11:13:30 (442 views)
  - Yes, flasher relay is under sterring column. (nt) - bmw635 2006-04-27 00:33:06 (350 views)
  - Re: Flasher Relay Location - joeb635 2006-04-26 06:45:25 (361 views)

OT, I need help from bmw635, pdef1949, dj750, & Al and anybody who's familiar - AL 2006-04-20 15:52:23 (764 views)
- Re: OT, I need help from bmw635, pdef1949, dj750, & Al and anybody who's familiar (url) - dj750 2006-04-21 08:09:47 (375 views)
- Here's an E38.org ~for E24. http://www.normgrills.net/bcg/ (nt) - bmw635 2006-04-21 00:15:36 (408 views)
- Upgrade info: 82-89 635 can add E32 750 front brakes, E34 540 rear brakes, - bmw635 2006-04-20 23:50:15 (411 views)
- L6 specific - JohnG 2006-04-20 23:25:52 (345 views)
  - Dash replacement. - pdef1949 2006-04-20 23:40:16 (391 views)
    - I am interested, Phil- still got 1 635 left. (nt) - bmw635 2006-04-20 23:42:08 (344 views)
      - You've got mail (nt) - pdef1949 2006-04-21 00:14:35 (314 views)
- I'd get 88-89 or 82-86 Euro car. 87 L7 is a cross between 86 and 88. - bmw635 2006-04-20 23:25:29 (412 views)
  - How could I tell if it has SLS? - AL 2006-04-21 00:06:56 (341 views)
    - Re: How to tell if it has SLS - pdef1949 2006-04-21 01:29:17 (321 views)
- Things to look out for on the E24 - pdef1949 2006-04-20 21:10:02 (479 views)
  - The owner said she had the front end suspension done by an indy and it cost her - AL 2006-04-20 23:11:28 (332 views)
    - Re: The owner said she had the front end suspension done by an indy and it cost her - pdef1949 2006-04-20 23:37:47 (372 views)
    - Upper control arm/ lower control arm: $30/ea, steering linkage (center, L, R): - bmw635 2006-04-20 23:35:17 (356 views)
    - Gray market is Euro version that was import into US by private party. (pic) (url) - bmw635 2006-04-20 23:31:59 (563 views)
      - Re: Gray market is Euro version that was import into US by private party. (pic) - bmw635 2006-04-20 23:41:18 (504 views)
        
        My grey market e24 635csi 1981 (pic) - euro635gas 2006-05-02 00:22:15 (488 views)
        Actually the black one is M635/ Euro M6: fender flare. My mistake (nt) - bmw635 2006-04-21 00:10:28 (387 views)
- Things to look out for on 6 series - alicat 2006-04-20 20:23:05 (432 views)
  - How do I check the transmission? - AL 2006-04-20 23:22:29 (328 views)
- I'm confused. The e24 is supposed to be the 6 series? (url) - kingdom7 2006-04-20 16:10:12 (391 views)
  - I mean L6 not L7 Thanks! (nt) - AL 2006-04-20 16:17:11 (332 views)

Aux radiator and fan? - dj750 2006-04-27 15:59:55 (328 views)
- Re: Aux radiator and fan? (url) - kff 2006-04-27 16:42:11 (358 views)

OT with a twist. How much would you pay for this shark? (Long post lot of pix) (pic) - AL 2006-04-21 14:53:32 (878 views)
- Is there a huge dent in the back of that e38 you saw? (nt) - absessler 2006-04-22 11:31:11 (311 views)
- I was too busy taking pictures I forgot to check the heaters and the transmissio - AL 2006-04-22 04:23:53 (338 views)
- Re: regarding the A/C - arunp1783 2006-04-22 04:12:45 (339 views)
- The clear & paint will cost $3000+ to repaint. assume it having 120k mile, I'd - bmw635 2006-04-21 23:05:07 (396 views)
  - There are many 6ers out there to choose from. The M6/M635 and (pic) - dj750 2006-04-22 07:52:05 (491 views)
    - M car has problem with broken valve springs but otherwise solid. - bmw635 2006-04-22 08:02:06 (404 views)
- Kinda' tough to say not knowing the miles, - Tim G in Central NJ 2006-04-21 19:12:28 (335 views)
- Re: OT with a twist. How much would you pay for this shark? (Long post lot of pix) (pic) - AL 2006-04-21 15:06:10 (518 views)
  - Not OEM MPars (nt) - dj750 2006-04-22 08:42:37 (320 views)
  - How much would you pay for this shark? (url) - pdef1949 2006-04-21 19:30:52 (387 views)
    - Thanks Phil! - AL 2006-04-21 23:27:13 (334 views)
      - Make an offer - pdef1949 2006-04-21 23:55:25 (339 views)
        
        The drivers seat sag when I sit on it. Do you know how much recaros cost? - AL 2006-04-22 01:28:58 (389 views)
        
        Check with Maximillon for new cover and padding kit.... - txdarth 2006-04-22 10:36:59 (370 views)
        The Recaro seat can be rebuild/ ulpholstered by a good shop. (nt) - bmw635 2006-04-22 01:47:31 (444 views)
        
        Actually that was what the lady did but the seat still doesn't feel right. - AL 2006-04-22 02:08:29 (320 views)
        
        I agree with Peter on this one - pdef1949 2006-04-22 03:47:52 (326 views)
        You can convert to 5 spd. At this point, I would keep looking for a better - bmw635 2006-04-22 02:11:44 (320 views)
        
        Re: The drivers seat sag when I sit on it. Do you know how much recaros cost? - pdef1949 2006-04-22 01:41:45 (352 views)

I'm going to check out a 1987 L6 automatic 135K miles. What things should I be - AL 2006-04-20 13:40:18 (335 views)
- Check this out (url) - kff 2006-04-21 11:20:29 (329 views)
- Re: - thegreendragonfly 2006-04-21 00:55:08 (312 views)

Help ID this front airdam (pic) - autobahnfahrer 2006-04-18 10:59:17 (473 views)
- Zender! I have 1 like that with 'Zender' molded in. (nt) - bmw635 2006-04-21 00:29:26 (334 views)
- Re: Help ID this front airdam - resabed01 2006-04-18 11:22:35 (385 views)

looking for a new shifter - thegreendragonfly 2006-04-19 04:51:10 (336 views)
- Any shifter will fit! The slop is in the bushing- replacable. 2002 shifter is - bmw635 2006-04-21 00:27:59 (304 views)
- I would contact autosolutions and ask them - kff 2006-04-19 22:25:51 (304 views)

635 lights/door locks - lmurray50 2006-03-31 21:45:56 (348 views)
- Seems odd that the lights stay on. Maybe the unloader relay - kff 2006-04-01 16:38:55 (341 views)
  - Re: Seems odd that the lights stay on. Maybe the unloader relay - lmurray50 2006-04-03 13:18:22 (375 views)
    - You need the electrical manual for your car. I have only seen (url) - kff 2006-04-04 21:19:02 (378 views)
      - That site is hard to use so maybe you should download a (url) - kff 2006-04-04 21:25:22 (358 views)
  - Re: Seems odd that the lights stay on. Maybe the unloader relay - lmurray50 2006-04-03 13:02:49 (345 views)

Are the rear differentials for all 6ers interchangeable? (nt) - dj750 2006-04-01 20:10:43 (371 views)
- I don't think so. the 6 is a car made on two different chassis - kff 2006-04-01 23:52:00 (386 views)
  - Mine has a 1/82 build date so it appears there's no changing to a LSD. - dj750 2006-04-02 00:13:54 (345 views)
    - Most of the Euro's had a 3.07 LSD, so there is hope... - Erwin8r - ///M6 2006-04-03 13:58:33 (335 views)
    - Here is a site that shows them both (url) - kff 2006-04-02 20:18:56 (387 views)

visitor from the E32 (750il) board with a question - plbowler 2006-03-31 10:42:19 (341 views)
- It was meant to be a high performance boulevard cruiser - kff 2006-03-31 12:20:01 (363 views)
  - perfect!, thats brilliant thanks - plbowler 2006-03-31 12:43:43 (308 views)
    - Parts are everywhere, but some are getting scarce, like - kff 2006-03-31 20:32:49 (337 views)
    - I've had 4-635 at 1 time and got 1 now. Engine/ trans is same as E23, E28 and is - bmw635 2006-03-31 14:56:18 (315 views)

will bumper pieces & front spoiler from 88/89 fit earlier e24s? - cfisher 2006-03-29 14:25:49 (337 views)
- The entire assembly should bolt on as the frame are the same, except the E12 - bmw635 2006-03-31 14:58:39 (294 views)