The 7 Series E23 Forum

Cranks, no start issue, does have spark - pdx733i 2008-04-01 23:37:38 (86 views)
- Re: Cranks, no start issue, does have spark - ericcue 2008-04-02 20:05:55 (50 views)
- Are you checking fuel pump relay pin 87 with ignition on or at crank? - demet 2008-04-02 19:34:30 (64 views)
  - Re: Are you checking fuel pump relay pin 87 with ignition on or at crank? - pdx733i 2008-04-02 23:09:48 (56 views)
    - Ok, remove fuse 11 and check for power at crank at each connector. (pic) - demet 2008-04-03 11:59:44 (123 views)
      - I checked for power at crank at each connector, its not quite zero, - pdx733i 2008-04-06 22:26:39 (48 views)
        
        Ok, let's recap. - demet 2008-04-07 11:42:27 (43 views)
        
        I need a recap, then a nightcap - pdx733i 2008-04-10 19:19:55 (38 views)
        
        I always have nightcaps regardless of recaps and sometimes because of them ... - demet 2008-04-10 19:40:31 (50 views)
        
        Now, after 'YES' to the first four questions, the FP relay - pdx733i 2008-04-12 19:52:28 (46 views)
        
        Good. The main is working. - demet 2008-04-14 08:56:31 (43 views)
        
        Re: Good. The main is working. - weierj80 2008-04-15 17:16:50 (56 views)
        
        Looking at ETM for 83, 84 I can't see this 5-pin relay with 87b. - demet 2008-04-16 15:05:18 (21 views)
        
        Re: Looking at ETM for 83, 84 I can't see this 5-pin relay with 87b. - weierj80 2008-04-16 20:02:30 (30 views)
        
        Can you post the schematic? (pic) - demet 2008-04-16 21:11:58 (41 views)
        
        Re: Can you post the schematic? (pic) - weierj80 2008-04-18 17:54:32 (46 views)
        
        My 733 now starts and runs: The shop reports excess resistance (nt) - pdx733i 2008-04-19 14:53:41 (23 views)
        
        The shop reports excess resistance at battery ground clamp - pdx733i 2008-04-19 15:03:27 (29 views)
        
        Re: The shop reports excess resistance at battery ground clamp - weierj80 2008-05-24 19:09:59 (17 views)
        
        Re: Can you post the schematic? (pic) - weierj80 2008-04-18 17:56:47 (33 views)
        
        This is the same info I am working from, from a link - pdx733i 2008-04-17 02:39:25 (21 views)
        
        Re: Looking at ETM for 83, 84 I can't see this 5-pin relay with 87b. - weierj80 2008-04-16 20:12:04 (28 views)
        
        So, yes to the first 3 questions, and yes to power at pin 86 with - pdx733i 2008-04-11 23:29:14 (35 views)
        
        Are you checking for power to pin 87 with the relay installed? - demet 2008-04-12 15:42:00 (35 views)
        
        Now, I did and...yes there is battery voltage to both 87's on - pdx733i 2008-04-12 16:53:57 (32 views)
        
        Oh, i also hear the relay click on and off when I install/uninstall it (nt) - pdx733i 2008-04-12 16:55:06 (36 views)
        
        Re: Oh, i also hear the relay click on and off when I install/uninstall it - weierj80 2008-04-13 16:01:55 (28 views)
        
        Cheers to that, I'll report back, thanks (nt) - pdx733i 2008-04-11 01:07:50 (27 views)
- Jumper Main Relay - jasonwilcox 2008-04-02 16:26:18 (47 views)

Brake caliper powder coating - cambridge 2008-04-04 18:12:28 (58 views)
- Evans Performance near Atlanta can do that. (pic) (url) - davidc 2008-04-04 18:26:17 (123 views)
  - Re: Evans Performance near Atlanta can do that. - russianblue 2008-04-07 11:21:30 (37 views)
    - They did the valve cover but my wife hand-painted the blue and white - davidc 2008-04-10 04:17:15 (33 views)
      - Here's a view of it installed on the engine. (pic) - davidc 2008-04-10 04:20:30 (77 views)
        
        Very nice! (nt) - demet 2008-04-10 19:56:23 (27 views)

Cracks in dashboard - 2ck 2008-04-02 17:51:16 (86 views)
- All, thanks for the input. I also found on eHow.com that... - 2ck 2008-04-04 11:24:00 (73 views)
  - Can you post the specific link?..I would like to read what they have to say. (nt) - wabiker 2008-04-09 10:10:08 (38 views)
    - I have not tried this myself, but here is the link... (url) - 2ck 2008-04-09 10:23:33 (60 views)
- Doesn't Leatherique.com sell some kind of plastic filler that you could dye? (nt) - davidc 2008-04-04 01:32:44 (56 views)
- You have a nutria colored dash. I don't know of a good - kff 2008-04-03 10:20:53 (65 views)
- Two real options I know of... - ejonesie22 2008-04-03 09:09:49 (88 views)

help, car got vandalized - Adel - 1986 735i & 728i 2008-03-21 08:59:05 (67 views)
- unless they've been disconnected.... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-04-08 15:37:06 (31 views)
- Re: help, car got vandalized - hec85735i 2008-03-21 11:38:29 (42 views)
  - Re: help, car got vandalized - sfdon 2008-03-21 13:21:25 (41 views)

DIY injector flow bench (pic) (url) - demet 2008-03-30 13:05:15 (1547 views)
- Re: DIY injector flow bench - wngnutmv 2008-03-31 14:41:14 (109 views)
- I love it! What ingenuity! (nt) - davidc 2008-03-31 13:49:49 (90 views)
- Your wife is gonna kick your ass when she finds out - sfdon 2008-03-30 22:25:59 (110 views)
  - That woopin ain't going to happen. Bought my own at Walmart! - demet 2008-03-30 23:56:52 (95 views)
- Very nice setup. I once did a simple setup for my old 76 with the - Roy In GA 2008-03-30 17:41:49 (74 views)
  - Direct connect to battery voltage. - demet 2008-03-30 17:54:30 (90 views)
    - The old ones (76) had resistors in the circuit to reduce the voltage and the new - Roy In GA 2008-03-31 00:06:05 (68 views)
- Thats great! (nt) - goms187 2008-03-30 15:37:11 (58 views)
- Demet your the man..lol Love the setup - ((((BIGANT)))) 2008-03-30 15:12:05 (66 views)
- Video clip (url) - demet 2008-03-30 13:16:08 (144 views)
  - Re: Video clip - russianblue 2008-04-07 11:53:35 (63 views)
    - Neet. - demet 2008-04-07 14:23:58 (49 views)

As our cars age...some things to keep in mind - Vern 2008-04-04 16:50:24 (109 views)
- Re: As our cars age...some things to keep in mind - Hitmanx 2008-04-05 01:50:27 (47 views)
- Thanks Vern, good points. - demet 2008-04-04 17:52:15 (44 views)
  - A work around, according to Don, - Vern 2008-04-05 23:16:16 (43 views)

Disassembly of Bosch connectors? (pic) - demet 2008-04-03 14:57:49 (148 views)
- Very nice pics, Demet. Super cool. (nt) - Vern 2008-04-05 23:14:07 (30 views)
- Well, well...the housing also has crimp locks...I did not - Area52 2008-04-04 20:39:07 (34 views)
- thx Demet, just in time too...I was fix'n to go Medieval (nt) - wabiker 2008-04-03 15:11:35 (35 views)

bumpy braking..... - dariusndallas 2008-03-23 17:31:46 (73 views)
- Re: d_ _ _ ndest thing... - dariusndallas 2008-04-05 07:59:21 (46 views)
- Re: another symtom with the brakes: - dariusndallas 2008-04-03 22:25:33 (37 views)
  - Re: another symtom with the brakes: - stevebu 2008-04-04 06:56:50 (48 views)
    - +1 on that. I've had that with a sticking caliper. - demet 2008-04-04 17:54:58 (44 views)
- try this... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-03-26 08:14:07 (92 views)
  - Re: try this... - dariusndallas 2008-03-27 15:23:20 (47 views)
- Have a helper? - stevebu 2008-03-23 18:19:12 (61 views)

Brake And Hood Shocks Questions - Help Please! (url) - Oka 2008-04-03 00:30:07 (82 views)
- Agree with all comments from these experts plus one word: broom stick (nt) - demet 2008-04-03 12:30:49 (46 views)
  - But wait...there's more...simply store it in the tail pipe! (nt) - Area52 2008-04-03 20:05:00 (41 views)
  - Well a special broom stick. When I had an Rx-7, I carried (url) - kff 2008-04-03 17:17:19 (54 views)
    - ...and hollowed out to double as a container for his favorite brew... (nt) - 2ck 2008-04-03 19:12:10 (38 views)
      - Given Oka's geographic location, can you say Popsickle. - demet 2008-04-03 20:31:35 (52 views)
    - LOL, BTW interesting link. (nt) - demet 2008-04-03 19:01:40 (37 views)
- a few more comments - kff 2008-04-03 10:48:47 (59 views)
- several comments - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-04-03 07:15:00 (60 views)

Piece needed - jlund 2008-04-03 01:02:44 (59 views)
- One of these Jeff? (pic) - demet 2008-04-03 12:23:56 (104 views)
  - Re: right on friend. Passengerside that is. More demet> - jlund 2008-04-03 17:31:20 (45 views)
    - I'ts yours. Give me a shout. A very loud shout. (nt) - demet 2008-04-03 18:57:55 (44 views)
      - Re:Yea hoo> You should hear how loud that was> - jlund 2008-04-03 19:58:10 (36 views)

Pouvoir, did you ever get your right side lights working? - spencer7 2008-04-03 16:39:44 (37 views)

My problems with E23 bmw 745i (pic) - basim007 2008-03-25 08:23:02 (226 views)
- Re: My problems with E23 bmw 745i - spencer7 2008-04-03 16:20:25 (52 views)
- Looks like the valve cover is leaking. - demet 2008-03-25 09:24:52 (64 views)
- Some help, maybe- - stevebu 2008-03-25 09:23:41 (66 views)

Driveshaft time... - Hitmanx 2008-04-02 14:05:46 (57 views)
- Re: Driveshaft time... - alan(735 work in progress) 2008-04-02 14:25:16 (57 views)
  - Re: Driveshaft time... - Hitmanx 2008-04-03 14:15:36 (46 views)
    - YGM (nt) - alan(735 work in progress) 2008-04-03 14:44:25 (39 views)

Ellie Mae comes home soon... Yayyyyyy!!! - Vern 2008-04-02 21:19:40 (64 views)
- Re: Ellie Mae comes home soon... Yayyyyyy!!! - Hitmanx 2008-04-03 14:14:50 (37 views)
- It is always nce when the children can come home... - ejonesie22 2008-04-03 09:04:37 (30 views)
- Right on.... Pics soon???? (nt) - wabiker 2008-04-02 21:43:39 (33 views)
- Woo Hoo!!! Glad hear it, Vern. Let's get going on the mods. (nt) - Draleu 2008-04-02 21:22:22 (29 views)

KEYLESS ENTRY INSTALL HELP - 944s 2008-04-02 18:07:17 (52 views)
- See if this helps.... (url) - davidc 2008-04-02 21:49:54 (49 views)
  - Re: See if this helps.... - 944s 2008-04-03 00:42:55 (39 views)
    - Your ETM is your friend... (pic) - demet 2008-04-03 12:52:30 (79 views)
      - Re: Your ETM is your friend... - 944s 2008-04-03 13:01:35 (35 views)

tranny monut - 944s 2008-04-02 15:10:55 (37 views)
- Re: tranny monut - stevebu 2008-04-03 06:51:47 (34 views)

Holy Guibo again Batman! (pic) - strobachyzoo 2008-04-01 15:27:18 (151 views)
- Verify that you are using the right bolts... - sfdon 2008-04-02 12:26:39 (67 views)
  - Re: Verify that you are using the right bolts... - strobachyzoo 2008-04-02 22:22:23 (66 views)
  - I second the U joints... (nt) - James '84 745i 2008-04-02 18:52:38 (35 views)
- Something is not right. - ejonesie22 2008-04-02 08:50:27 (44 views)
- what is causing the short life??? - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-04-02 08:03:29 (44 views)
- e34 M5 Guibo is a possible upgrade! (url) - strobachyzoo 2008-04-01 19:53:29 (63 views)
  - That may not work, the bolts may be thicker. (nt) - demet 2008-04-01 19:56:32 (36 views)
    - Scrape that statement. Same M12 bolts. That may work. (nt) - demet 2008-04-01 20:00:06 (37 views)
- Buy one from BMW and get the warranty. - kff 2008-04-01 18:41:40 (40 views)

Wheel Spacers and Lug nuts - wabiker 2008-03-28 22:19:48 (53 views)
- Re: Wheel Spacers and Lug nuts (url) - JibbaJabba 2008-03-29 00:06:58 (61 views)
  - Good links...thx JibbaJabba (nt) - wabiker 2008-03-30 00:27:39 (30 views)
    - Anyone Familiar with these Spacers?? (url) - wabiker 2008-04-02 21:42:20 (45 views)
      - Re: Anyone Familiar with these Spacers?? (url) - bvachon 2008-04-02 21:58:42 (39 views)

Head Gasket/Timing Chain Wrenching Get Together in Palm Springs - 4/26-4/27 ?? - Draleu 2008-04-02 13:49:30 (57 views)
- Change of date to 5/10-5/11 - Confirmed by Don L. - Draleu 2008-04-02 15:59:22 (48 views)
  - Decent and Safe for $100 per nite!?!?!?!..... How much for the Crack Motel? (nt) - wabiker 2008-04-02 18:54:50 (33 views)
    - LOL Chris. Crack Motel ala Robert Downey Jr is $120/night in Palm Springs. (nt) - Draleu 2008-04-02 19:39:23 (31 views)
      - Damn yuppies spoil everything...! Hows about a seedy Biker Bar that'll - wabiker 2008-04-02 20:51:08 (39 views)
        
        Oh...yea.... You DID say Palm Springs didnt you..?? - wabiker 2008-04-02 20:56:06 (30 views)
- Re: Head Gasket/Timing Chain Wrenching Get Together in Palm Springs - 4/26-4/27 - alan(735 work in progress) 2008-04-02 14:30:28 (39 views)
- Forgot to add, you also get to check out in person the cloned BBS front air dam - Draleu 2008-04-02 14:11:04 (42 views)
- Never been to one of these before.... - 2ck 2008-04-02 13:58:15 (31 views)
  - ALL are welcome even if you arrive in a Ricer. It is a good opportunity to see a - Draleu 2008-04-02 14:06:48 (38 views)
    - sounds like a good trip for 733... Mebbe I can prove to Y'all that its NOT a - wabiker 2008-04-02 15:45:11 (47 views)

Woo Hoo!! BBS Clone Front Air Dam Sample Pics. (pic) - Draleu 2008-03-31 15:01:26 (173 views)
- will this fit ??? - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-04-01 07:48:27 (67 views)
  - Re: will this fit ??? - Draleu 2008-04-01 12:41:38 (66 views)
    - What's the cost for one at this point? (nt) - Kevin Elmore '86 735i 5-Spd VA Tech 2008-04-02 00:42:28 (59 views)
      - You Got Mail. (nt) - Draleu 2008-04-02 13:28:26 (39 views)
- Wow...looks good. (nt) - wabiker 2008-03-31 19:03:48 (45 views)
  - Re: Wow...looks good. (pic) - hec85735i 2008-04-02 10:13:16 (96 views)
    - You Got Mail. (nt) - Draleu 2008-04-02 13:35:54 (32 views)

e23 parts. Check for sale board (nt) - alan(735 work in progress) 2008-04-01 17:41:12 (85 views)

vacuum pump replacement - flatfootthomas 2008-03-27 14:10:02 (88 views)
- One on ebay right now (url) - demet 2008-04-01 10:14:59 (47 views)
  - Re: One on ebay right now - flatfootthomas 2008-04-01 13:33:25 (38 views)
    - Yup. That's the one. (nt) - demet 2008-04-01 13:37:59 (30 views)
- I bought a used one at a salvage yard for $25. (url) - davidc 2008-03-29 03:26:17 (44 views)
- another possibility.. - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2008-03-28 07:49:15 (56 views)
  - Re: another possibility.. - JibbaJabba 2008-03-29 00:09:33 (41 views)
    - Re: another possibility.. - flatfootthomas 2008-03-29 14:45:24 (34 views)
  - Re: another possibility.. - flatfootthomas 2008-03-28 19:54:50 (41 views)
- Re: vacuum pump replacement - Draleu 2008-03-27 15:14:29 (50 views)
  - Re: vacuum pump replacement - flatfootthomas 2008-03-27 15:51:48 (40 views)
    - Re: vacuum pump replacement - Draleu 2008-03-27 22:04:23 (46 views)

Super Duper Hose Clamps package for E23 (url) - Draleu 2008-03-20 13:49:08 (100 views)
- Ordered mine.... How them Diff mounts coming? (nt) - wabiker 2008-04-01 12:58:37 (24 views)
- Hey David, got a size/quantity breakdown for the 745 clamp set? - demet 2008-03-20 16:49:02 (29 views)
  - Re: Hey David, got a size/quantity breakdown for the 745 clamp set? - Draleu 2008-03-20 20:37:00 (46 views)
    - Sorry about that. You did good work though. They total 60. - demet 2008-03-20 22:07:41 (32 views)

Are my wheels worth keeping? - stickseven 2008-03-31 22:50:50 (67 views)
- pics? (nt) - demet 2008-04-01 10:16:53 (30 views)
  - Re: pics? - stickseven 2008-04-01 12:53:26 (49 views)
- Get everything you can off it and hit ebay and the boards...... - ejonesie22 2008-04-01 09:25:08 (37 views)
  - Re: Get everything you can off it and hit ebay and the boards...... - stickseven 2008-04-01 12:56:01 (37 views)
- Keep them- - stevebu 2008-04-01 06:28:27 (35 views)
  - Re: Keep them- - stickseven 2008-04-01 12:58:30 (31 views)

e23 Springs - chicagomark 2008-03-30 17:31:44 (80 views)
- Re: e23 Springs - Hitmanx 2008-03-30 21:51:49 (49 views)
  - It's not just the miles, it's the age. I replaced my springs about - davidc 2008-03-31 13:46:13 (72 views)
    - Re: It's not just the miles, it's the age. I replaced my springs about - chicagomark 2008-04-01 00:13:46 (39 views)
  - Re: e23 Springs - chicagomark 2008-03-30 23:40:14 (66 views)
    - If your car has not dropped, the springs are fine. - kff 2008-03-31 10:45:53 (61 views)

What is the NGK substitute for W8DC plugs? Anyone tried them? (nt) - Roy In GA 2008-03-29 11:37:45 (38 views)
- I haven't used them, but guys in the know like 'em. (nt) - Vern 2008-03-31 19:34:55 (35 views)
  - Thanks, I'll get some for the 528i. (nt) - Roy In GA 2008-03-31 22:12:57 (32 views)
- Re: What is the NGK substitute for W8DC plugs? Anyone tried them? - Hitmanx 2008-03-29 22:41:09 (40 views)

CD-ROM - 733er 2008-03-28 12:59:50 (75 views)
- Re: CD-ROM $60 Shipped!! - 733er 2008-03-31 16:25:07 (31 views)

Heater core removal - phathome 2008-03-20 17:22:08 (100 views)
- Hmmm...just so Happens, I own a non-82 ;-) (nt) - wabiker 2008-03-20 19:05:42 (43 views)
  - Re: Hmmm...just so Happens, I own a non-82 ;-) - BMW1066 2008-03-25 09:02:35 (42 views)
    - no dash removal - ghw 2008-03-25 09:31:02 (51 views)
      - Re: no dash removal - hossomat 2008-03-31 03:30:55 (37 views)
        
        Thanks Christian, would love to see your pics - philipuk 2008-03-31 05:21:21 (25 views)

window guides (url) - goms187 2008-03-29 21:13:53 (73 views)
- My Order from Max - wabiker 2008-03-30 00:26:39 (73 views)
  - Re: My Order from Max - goms187 2008-03-30 01:20:32 (38 views)
- maximillian still has all in stock! (url) - goms187 2008-03-29 22:53:44 (58 views)
- Yes. The ones you want are the ones that have - kff 2008-03-29 22:16:27 (42 views)

floor padding (url) - goms187 2008-03-29 18:35:12 (52 views)
- You mean other than the later version is NLA? - kff 2008-03-29 19:34:48 (40 views)
  - well yeah thats what i want to know - goms187 2008-03-29 21:04:52 (32 views)
    - If it is NLA you can't buy it new from that source. - kff 2008-03-29 22:18:21 (30 views)
      - yeah the one for my car is NLA! - goms187 2008-03-29 22:51:29 (40 views)

Wiper blade fixing anyone? (pic) - basim007 2008-03-28 07:39:23 (93 views)
- Have you tried removing the arm first before you put the spring back? (nt) - Roy In GA 2008-03-28 21:10:37 (31 views)
  - Re: Have you tried removing the arm first before you put the spring back? - basim007 2008-03-29 04:06:34 (35 views)
    - Re: Have you tried removing the arm first before you put the spring back? - kff 2008-03-29 10:07:22 (34 views)

Cooling system hoses - 2ck 2008-03-26 12:30:05 (68 views)
- Ive found Spark Plug Pullers come in real (url) - wabiker 2008-03-27 12:30:02 (39 views)
- There are 9 hoses in the coolant system. Be sure to - kff 2008-03-26 13:00:23 (68 views)
  - Re: There are 9 hoses in the coolant system. Be sure to - 2ck 2008-03-26 15:59:40 (47 views)
    - Re: There are 9 hoses in the coolant system. Be sure to - kff 2008-03-26 19:08:25 (42 views)

How badly do we want NOS MTechnic springs? - Draleu 2008-03-26 17:05:44 (81 views)
- The 745 could use a set (nt) - wabiker 2008-03-26 22:45:42 (39 views)
- Oooh, that sounds interesting... (nt) - davidc 2008-03-26 22:16:56 (36 views)
- Re: How badly do we want NOS MTechnic springs? - BMW1066 2008-03-26 20:55:10 (49 views)

Anyone here go 'crazy' and install a Schrick 284 cam? - 2ck 2008-03-25 21:56:47 (55 views)
- I have a cam in my Euro motor - kff 2008-03-26 11:05:56 (55 views)
- Re: Anyone here go 'crazy' and install a Schrick 284 cam? - Hitmanx 2008-03-26 01:45:42 (46 views)
  - My old engine use to have the 284 in it - goms187 2008-03-26 21:53:10 (48 views)

c101 connector cleaning? (pic) - demet 2008-03-25 20:38:37 (99 views)
- Thanks for the tips, I'm buying a bunch of mini pipe brushes. (url) - demet 2008-03-26 21:18:42 (45 views)
- Good contact cleaner or Deoxit and some small electronics brushes. - ejonesie22 2008-03-26 13:08:54 (41 views)
- First use DeOxit, Second use DeOxit. - kff 2008-03-25 21:28:39 (44 views)
  - As a former Pipe Smoker... - wabiker 2008-03-26 12:40:14 (40 views)

New Improved Version of the improved improvedTurbo Upgrade (pic) - Draleu 2008-03-26 14:02:58 (97 views)
- When will the improved, improved, improved, uprated updated version be out? (nt) - ejonesie22 2008-03-26 15:24:23 (38 views)
  - LOL Evan. The non ceramic ones had been out since last month. I just don't have - Draleu 2008-03-26 15:35:22 (45 views)

5 Speed parts car on CL in SoCal $800 - Not affiliated (url) - Draleu 2008-03-26 14:37:39 (59 views)

New Radiator and Fan? - wngnutmv 2008-03-24 14:46:44 (56 views)
- Re: New Radiator and Fan? - Hitmanx 2008-03-25 01:13:23 (39 views)
- Re: New Radiator and Fan? (url) - Draleu 2008-03-24 16:20:23 (59 views)
  - Re: New Radiator and Fan? - wngnutmv 2008-03-25 14:29:38 (48 views)
    - Re: New Radiator and Fan? - Hitmanx 2008-03-26 01:42:37 (37 views)
      - Re: New Radiator and Fan? - wngnutmv 2008-03-26 11:16:39 (41 views)

Does the 735i and 745i use the same air filter? (nt) - 2ck 2008-03-25 19:32:40 (38 views)
- Yup. (nt) - demet 2008-03-25 20:39:22 (33 views)

turn signal fuse problem - flatfootthomas 2008-03-24 16:15:21 (48 views)
- Are all 4 bulbs in good shape?? (nt) - Roy In GA 2008-03-24 23:52:33 (35 views)
  - Re: Are all 4 bulbs in good shape?? - flatfootthomas 2008-03-25 13:25:45 (22 views)
  - Re: Are all 4 bulbs in good shape?? - flatfootthomas 2008-03-25 12:17:56 (29 views)

Engine Cleanup.. - basim007 2008-03-25 08:31:52 (60 views)
- Re: Engine Cleanup.. (url) - wabiker 2008-03-25 10:43:41 (88 views)

Power steering filter ? ! ? ! ? - dariusndallas 2008-03-23 17:15:11 (71 views)
- Thanx for your help, folks (nt) (nt) - dariusndallas 2008-03-25 10:25:48 (40 views)
- I bought that once also- it's wrong- - stevebu 2008-03-23 18:12:27 (61 views)
- Seem to be a couple of variations on item 11 in the reservoir can. (url) - Roy In GA 2008-03-23 17:41:04 (57 views)

Need help identifying this wheel (pic) - Draleu 2008-03-24 23:48:50 (139 views)

Shaking when braking - cfd740il 2008-03-23 21:15:17 (60 views)
- Re: Shaking when braking - Draleu 2008-03-24 16:25:37 (48 views)

Steering wheels for sale (url) - kff 2008-03-24 14:25:09 (108 views)
- Wow. Very good deal. Somebody grab them now. (nt) - Draleu 2008-03-24 16:21:27 (32 views)

I'm guessing the shift knob isnt OEM... (url) - James '84 745i 2008-03-23 21:48:28 (83 views)
- May not be in teh ETK but the Germans may well approve (nt) - kff 2008-03-24 11:11:17 (38 views)

HELP!!! Attempting to change my oil! - zecrazysvierge 2008-03-22 20:31:53 (110 views)
- Items 4 and 10. (url) - Roy In GA 2008-03-23 17:33:45 (62 views)
- The filter should also come with a packet containing the 0-ring for the filter - Roy In GA 2008-03-23 17:31:04 (52 views)
- Sorry if this sounds like a stupid question, but... - demet 2008-03-23 11:11:52 (53 views)
- The oil filter has a bolt that goes through it and - kff 2008-03-23 11:11:30 (58 views)
- When's the last time you had the oil filter changed? - 2ck 2008-03-22 21:16:23 (55 views)

How do you remove and replace door window frame chrome trim? - cfisher 2008-03-20 13:41:57 (47 views)
- Re: How do you remove and replace door window frame chrome trim? - ejonesie22 2008-03-20 15:01:19 (42 views)
  - I think you are thinking of the door moulding. I was asking about the chrome... - cfisher 2008-03-23 00:07:40 (35 views)

Good bye my X 735i - bmw740jor 2008-03-22 03:33:36 (69 views)
- Great cars.. Good luck (nt) - ((((BIGANT)))) 2008-03-22 22:47:05 (41 views)

Next weekend’s fun and an early start to the 25th Anniversary 733i Festivities (pic) - ejonesie22 2008-03-20 10:09:13 (165 views)
- isn't the 3.73 diff a 'small' diff? - ((((BIGANT)))) 2008-03-21 09:08:49 (30 views)
  - I am going to do photos and a write up of the swap fdor our records here. - ejonesie22 2008-03-21 15:31:45 (34 views)
  - The 3.73 is a medium diff, the small diff is used in the (url) - kff 2008-03-21 10:53:29 (59 views)
    - Hmm, thank you.. Years ago I was told different - ((((BIGANT)))) 2008-03-22 22:44:17 (34 views)
    - Thanks for reminding me about the output shafts... - ejonesie22 2008-03-21 14:44:43 (23 views)

M1 style steering wheel + need help with horn wiring fault (pic) - phathome 2008-03-22 13:13:02 (100 views)

headlight replacement - 2ck 2008-03-21 17:29:51 (52 views)
- US car?, remove the screws holding the grille in place - kff 2008-03-21 19:33:32 (38 views)
  - Yes, this is for a US car. Thanks for the 'how-to.' I will give it a shot. - 2ck 2008-03-22 11:00:38 (35 views)
    - I missed a couple things, the grille on the E23 - kff 2008-03-22 12:25:59 (40 views)

I have a couple of small holes in my e28 exhaust system and - Roy In GA 2008-03-21 23:48:16 (43 views)
- you might try this.... (url) - wabiker 2008-03-22 11:35:42 (51 views)

HVAC Wheel Repair - vjohansen 2008-03-21 19:57:21 (45 views)
- Re: HVAC Wheel Repair (url) - kff 2008-03-21 21:12:54 (49 views)
  - Re: HVAC Wheel Repair - vjohansen 2008-03-22 09:16:38 (37 views)

Still need mechanic! - BigBruce 2008-03-20 09:46:01 (39 views)
- Re: Still need mechanic! - stevebu 2008-03-21 21:42:14 (32 views)
  - Re: Still need mechanic! - BigBruce 2008-03-22 08:16:43 (36 views)

Hartage 7 on ebay